Metes and Bounds Surveys for an Unplatted Texas Tract

“Beginning at an iron rod found in the north line of the old county road, thence North 45 degrees East 412.6 feet to a 60d nail in a fence corner post.” Lines like that fill deeds for unplatted land across Texas. They read like directions from a treasure map, and some of the landmarks they mention may be long gone.
If you’re buying, selling, financing, or developing land without a recorded subdivision plat, the legal description is the boundary. A metes and bounds survey checks that description against the ground and the records, then produces a clear, current description you can rely on. This guide explains how that process works and what you should ask for.
What Makes an Unplatted Texas Tract Different From a Platted Lot
A platted lot is part of a recorded subdivision map. Its legal description can be as short as a lot and block number because the plat already shows the dimensions, corners, and easements. Anyone can look up the plat and see the lot’s shape.
An unplatted tract has no recorded subdivision map behind it. Its boundary is described in the deed itself, usually by metes and bounds. In Texas, these descriptions typically also name the original land grant survey and abstract number, such as a tract “out of the John Smith Survey, Abstract No. 123,” which ties the land to the original grant records.
Unplatted tracts are common on rural acreage, family land that’s been split over generations, and older parcels near growing areas. Each split can add a new description, and errors can stack up over time. That’s why these tracts often need more research than a typical subdivision lot.
How Surveyors Interpret Metes and Bounds Legal Descriptions
Metes and bounds is a way of describing land by its boundary lines. “Metes” are the measurements, meaning directions and distances. “Bounds” are the boundaries, such as monuments, roads, creeks, or neighboring tracts.
A typical description starts at a point of beginning and then follows each line around the tract until it returns to the start. Each line, called a call, gives a bearing, a distance, and often a monument at the end. The description may also name adjoining owners, which helps tie your tract to the land around it.
Old descriptions aren’t always consistent. A distance may not match the monuments found on the ground, or an older tract may have been measured with chains and compass instead of modern equipment. When calls conflict, surveyors weigh the evidence using long-established principles. In general, original monuments and natural features carry more weight than written distances or stated acreage.
Reviewing Deed Records and Historical Survey Evidence
Good fieldwork starts with good research. A surveyor reviews your deed and the deeds that came before it, often called the chain of title. They also pull deeds and surveys for neighboring tracts, since your boundary is their boundary too.
Useful records often include:
- Current and prior deeds for your tract and adjoining tracts.
- Earlier surveys, field notes, and sketches.
- Original grant and survey records, which in Texas are often kept by the General Land Office.
- Recorded easements, right-of-way deeds, and road dedications.
- Title commitment documents if a sale or loan is in progress.
Share any old surveys, fence history, or family knowledge you have. A faded survey from decades ago can point the crew to a buried pipe or rock mound that settles a key corner. The more evidence the surveyor starts with, the stronger the final result.
Establishing Boundary Corners and Preparing an Updated Survey Description
With the records in hand, the field crew searches for the monuments named in the deeds. These may be iron rods, pipes, stones, fence corners, or marked trees. The crew also locates fences, roads, creeks, and buildings that help show how the land has been used.
The surveyor then compares what was found to what the records say. Using professional judgment and established boundary principles, they decide where each corner belongs. Missing corners can be set with new monuments, often iron rods with caps stamped with the surveyor’s information.
The final product usually includes a signed survey plat and an updated metes and bounds description. The new description uses current measurements and references the monuments found or set. It often notes the original survey, abstract number, and the deed it’s based on, so future readers can follow the history. If evidence shows overlaps, gaps, or encroachments, the survey should point them out so they can be addressed.
Using Metes and Bounds Survey Results for Land Transactions and Development
For a sale or loan, a clear survey helps the buyer, lender, and title company agree on exactly what’s being conveyed. Title companies often review the survey before issuing a policy, and some lenders have specific survey requirements. Those needs can vary by lender, title company, and property type, so confirm them before you order.
For development, the survey becomes the starting point for site planning. Engineers and designers use the boundary to lay out buildings, roads, utilities, and setbacks. Dividing the land into lots for sale or building often requires a recorded plat, and platting rules vary by city and county, so check with the local planning office early.
Splitting off part of a tract usually needs a new description for each piece. A surveyor can prepare those descriptions so the parts fit together without gaps or overlaps. If your closing date, permit, or construction start depends on the survey, give yourself extra time for research on older tracts.
Frequently Asked Questions
What is a metes and bounds survey?
A metes and bounds survey locates a property’s boundary using its legal description. The description follows the boundary with bearings, distances, and monuments. The surveyor checks those calls against the records and the ground. The result is a current survey plat and an updated description.
Why does my deed mention a survey and abstract number?
Texas land is often tied to the original land grant surveys made when the state was settled. Each original survey has a name and an abstract number used in county records. That reference helps locate your tract within the larger grant. It’s a normal part of many Texas legal descriptions.
What if the deed distances don’t match what’s on the ground?
Mismatches are common on older tracts. Early surveys used different tools and methods, and monuments may have been moved or lost. Surveyors weigh the evidence using established principles to decide where the line belongs. The survey should explain any significant differences found.
Can I subdivide an unplatted tract without a plat?
That depends on local rules and how the land will be divided. Many cities and counties require a plat when land is split into lots for sale or development. Some exceptions may exist, but they vary by jurisdiction. Check with the city or county planning office before you start.
How long does a metes and bounds survey take?
Timing depends on tract size, terrain, and how much research is needed. Older tracts with many prior splits can take longer to sort out. Weather and access can affect field time too. If your closing or permit depends on the survey, contact a surveyor early.
